The VISION is the ultimate all-round canopy for experienced BASE jumpers, whether it be urban slider down or alpine slider up, tracking or wingsuit flying.

The VISION is built on the foundations laid by its older brother, the famous OSP, which became the standard upon which all other BASE canopies are measured.

The VISION retains many characteristics of the OSP, like excellent openings and superb flight characteristics in deep brakes, but in the area of forward speed, glide and flare the VISION is taking things to a new level.

The VISION canopy is equipped with the MDV5 system  standard, providing reliable, efficient and comfortable on heading openings, slider up or slider down. For slider up, tracking and wingsuit jumps we recommend the use of a slow slider.

The VISION has expanded the performance envelope at both ends of the curve. It is unbelievably stable in calm or turbulent wind conditions in all flight regimes, thanks to a new airfoil, improved split ZP leading edge, optimized line trim and mini stabilizers in the center of the canopy.

The bridle attachment point is moved further back, so that the tension from the PC is applied to all the lines during opening, instead of just the AB lines, this improves the behavior of the deploying canopy and helps reduce the chance of tension knots.

The VISION has the ability to maintain a very steep and stable trajectory in deep brakes into tight landing areas with plenty of lift available for a soft landing. This is achieved by the use of SLAT Technology  on the canopy leading edge. Atair was the first parachute manufacturer to use slats with the introduction of the OSP canopy back in 2007.

Overall the handling is similar to a sports skydiving canopy, but still retaining the predictability, safety and reliability of a BASE canopy. Increased forward speed and improved glide allow you to reach distant landing areas. Toggle turns are fast, responsive and efficient. Recovery from stall to full drive is quick with minimal altitude loss. The canopy is responsive and powerful in front riser turns, a pleasure to swoop, with plenty of power for a great flare at the end.

We have added 3 additional sizes 235255 and 275 as many pilots found themselves exactly between 2 sizes.

The VISION canopy can be ordered in either F111 or PN9 lightweight material. As standard, the VISION is equipped with white, or at extra cost, black Dacron lines. Center tail gate and brake lines are made in red colour. We also offer the »Black option« where all reinforcement tapes and thread are in black colour as well as the VISION logo on the outer rib. As standard the canopy is equipped with rapid links or optional soft links.

Size

225, 235, 185, 205, 245, 255, 265, 275, 285, 305

Size185205225235245255265275285305
ManufacturerAtairAtairAtairAtairAtairAtairAtairAtairAtairAtair
Canopy NameVisionVisionVisionVisionVisionVisionVisionVisionVisionVision
Canopy Weight (lbs)----------
Tandem----------
LightweightYesYesYesYesYesYesYesYesYesYes
Motorized----------
BASEYesYesYesYesYesYesYesYesYesYes
Number of Cells7777777777
Flat Area (ft2)185.0205.0225.0235.0245.0255.0265.0275.0285.0305.0
Flat Span (ft)----------
Flat Aspect Ratio----------
Projected Aspect Ratio----------
Projected Area (ft2)----------
Chord Min (ft)----------
Chord Max (ft)----------
Volume (cu in)----------

Atair Vision

Product Attributes

Lightweight
BASE

Find Your Size with GearMatchTM Mini